Comic Book Pressing

in #comics2 years ago

This article can also be viewed on my personal web site at https://www.burgcomics.com/?p=944.

Apologies to anyone who has been paying attention to my steemit page for not posting in several months. I am going to try to get back on track with posting review from the Previews catalog starting with the November 2019 catalog. So keep an eye out on this page for future posts. I plan to additionally pick comics from each catalog that might be worth considering for a longer term investment.

I have been playing around with comic pressing for a few months now. If you are not familiar with comic pressing, it is a process where you attempt to remove some of the minor defects of a comic book and improve its condition prior to resale or sending the book off to be graded. Many companies are offering a “clean and press” service as an option when you send in #comics to have them graded. Many of your pressing companies are very tight-lipped about the process they use to clean and press. And, if you find an article online about the “clean and press” process, the “pros” will generally add a comment that the article has no idea what they are talking about and the process they are using will damage the book. Of course, they say this, and offer no additional insights into the pressing process.

I thought I would share some photos of a couple of #comics I recently pressed. These two books are both low grade #comics and really not worth the time, but I thought they would make great examples of what pressing can and cannot do to improve the grade of a comic. These #comics were only pressed, and no cleaning was performed on the books. This process takes about two days for me to complete for each book. The goal of day one is to get as much of the spine roll out of the comic as possible. Day two is used to press the book as a whole. You could see some additional improvement to the comic if you press for a longer period of time, but additional gains are going to be minimal.

Book one is the Challengers of the Unknown issue 74. This book has numerous problems as you can see from the following images. The flaws include a spine roll and a hard crease down the upper left edge of the book. The comic does not lay flat, has tears around the staples. However, the cover is still attached at both staples and the centerfold is also attached at both staples. You can check the following images to get an idea of how the book looked prior to the press.

100_6674.JPG
100_6675.JPG
100_6676.JPG
100_6677.JPG
100_6678.JPG
100_6679.JPG
100_6680.JPG
100_6681.JPG
100_6682.JPG
100_6683.JPG
100_6684.JPG
100_6685.JPG
100_6686.JPG

The biggest change to the book after the press was the significant improvement of the spine of the comic and getting it close to back to laying flat. I realize now I should have taken better pictures of the cover to show some of the creases that were not easily visible. So, in this example, what does pressing NOT fix. Any crease that breaks the color of the book will still be visible. Tears and missing pieces will also not be magically restored either. Pressing will also not remove aging of the paper.

100_6726.JPG
100_6727.JPG
100_6728.JPG
100_6729.JPG
100_6730.JPG
100_6731.JPG
100_6732.JPG
100_6733.JPG
100_6734.JPG
100_6735.JPG
100_6736.JPG
100_6737.JPG
100_6738.JPG

The second book in this pressing example is Strange Tales issue 150. This book also has numerous problems including a 1/4″ spine roll, missing piece from the upper left corner of the cover, red ink stain on the price, red ink stain on the back cover, a missing centerfold page, along with many creases and fold.

100_6665.JPG
100_6666.JPG
100_6667.JPG
100_6668.JPG
100_6669.JPG
100_6670.JPG
100_6671.JPG
100_6672.JPG
100_6673.JPG

After the press, the majority of the spine roll has been removed. Again, a press is not going to make missing pieces and pages magically again, but the overall presentation of the book has improved.

100_6739.JPG
100_6740.JPG
100_6741.JPG
100_6742.JPG
100_6743.JPG
100_6744.JPG
100_6745.JPG
100_6746.JPG
100_6747.JPG

Another thing to keep in mind about comic pressing, especially when you are attempting to remove spine roll, you are putting the book under a certain amount of stress. There are cases were #comics have been graded and the owner decided to resubmit through a service that cleans and presses prior to re-submission. There are cases where the comic came back from the second grade with a significantly lower grade, because damage occurred to the comic during the clean and press process. Damage can include tears to the cover and the cover become split or detached from the comic. So keep this in mind when submitting a higher value book for pressing.

Overall, I was please with the improvement I saw in these books, and I will continue to practice pressing books. Additionally, I plan to start doing some additional dry-cleaning on books that could potentially benefit from the process.

If you have experience with comic pressing, I would love to hear your comments, both positive and negative.!!

Sort:  

This post was shared in the Curation Collective Discord community for curators, and upvoted and resteemed by the @c-squared community account after manual review.
@c-squared runs a community witness. Please consider using one of your witness votes on us here

Hi. I was struck by the photographic details of this publication. I was very thorough to describe the pressing of the comic. Congratulations on this publication and congratulations on the new projects that come to you (sometimes you have to take risks even if others' books are damaged). A cordial greeting @burgcomics

Hi burgcomics,

This post has been upvoted by the Curie community curation project and associated vote trail as exceptional content (human curated and reviewed). Have a great day :)

Visit curiesteem.com or join the Curie Discord community to learn more.

Congratulations @burgcomics! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :

You received more than 2000 upvotes. Your next target is to reach 3000 upvotes.

You can view your badges on your Steem Board and compare to others on the Steem Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @steemitboard:

SteemFest⁴ commemorative badge refactored
Vote for @Steemitboard as a witness to get one more award and increased upvotes!

I do some pressing myself and have posted about it a bit here and there. I’d love to see more of your work with it!!! Good to have a fellow presser here.

Posted using Partiko iOS

Thanks. I am definitely still an amateur at it, but I have been pleased with some of the results. I have actually had a few requests to press books for other individuals. I am still concerned about the risk of damaging someone else's book though.

Yeah I practiced for a while on shit books before I started accepting others.

Posted using Partiko iOS

Sup Dork?!? Enjoy the Upvote!!! Keep up with the dorky content for more love!!!

Hello!

This post has been manually curated, resteemed
and gifted with some virtually delicious cake
from the @helpiecake curation team!

Much love to you from all of us at @helpie!
Keep up the great work!


helpiecake

Manually curated by @blewitt.


@helpie is a Community Witness.

Coin Marketplace

STEEM 0.30
TRX 0.06
JST 0.041
BTC 36573.27
ETH 2395.04
USDT 1.00
SBD 4.00